Product Description: The 850 Temperature/Flow Probe is a critical component designed to provide accurate feedback to the MR850 heater base, enabling precise power adjustments for optimal humidification. This probe is compatible with both MR850 and HC550 humidifiers and integrates seamlessly with RT-Series breathing circuits. Key Features: Accurate Monitoring: Provides real-time temperature and flow data, ensuring the MR850 heater base can adjust power for precise humidity control. Seamless Integration: Designed to work perfectly with MR850 and HC550 humidifiers, as well as RT-Series breathing circuits. Enhanced Patient Safety: Ensures correct humidity and temperature levels, crucial for patient comfort and safety during respiratory therapy. Reliable Performance: Manufactured with high-quality materials for durability and consistent performance over time. Easy Installation: User-friendly design allows for quick and straightforward installation, minimizing downtime and maintenance efforts. Product Codes and Descriptions: 900MR869: Temperature and flow probe adapter for 1.5 m (60") long RT-series breathing circuits 900MR868: Temperature and flow probe adapter for 1.1 m (44") long RT-series breathing circuits 900MR863: Temperature and flow probe adapter for 0.7 m (28") long RT-series breathing circuits 900MR861: Temperature and flow probe adapter for 1.8 m (72") long RT-series breathing circuits 900MR860: Temperature and flow probe adapter for 1.3 m (52") long RT-series breathing circuits Ensure the highest standards of respiratory care with the 850 Temperature/Flow Probe, designed for accuracy, reliability, and compatibility with your existing humidification systems.

Read more less

About the Product Refillable Water Bag   Product Refillable Water Bag Model 900PT401 Volume 1000 ml Compatible Devices Airvo 2  Included with the Purchase Refillable Water Bag- 2 nos Refillable Water Bag for myAirvo 2 Humidified High Flow System This is the refillable water bag from Fisher & Paykel specially designed for the user of myAirvo 2 Humidified High Flow System. It could be paired with Fisher & Paykel MR290 Auto-Fill Humidification Chamber to meet your needs.Volume:1000 mL.*2 water bags are in a pack.  

Read more less

The Fisher & Paykel MR850 Heated Humidifier is ideal for delivering warm and humidified gases to patients receiving mechanical ventilation, positive pressure breathing assistance, or other medical gases. With its easy to use design and exceptional performance, this humidifier can operate in both invasive and non-invasive control modes. It is part of a comprehensive system specifically designed to provide optimal humidity levels to both adult and infant patients.  This innovative system utilizes advanced algorithms and a dual feedback system to achieve ideal humidity levels while minimizing caregiver intervention. The MR850 is compatible with the full range of therapies offered by Fisher & Paykel Healthcare within the F&P Respiratory Care Continuum. Key Features of MR850 Heated Humidifier: Advanced Humidification: The MR850 delivers consistent humidity levels to prevent dryness and irritation, providing a more comfortable breathing experience. Dual Control Modes: Operates in both Invasive and Non-invasive modes, making it versatile for various respiratory needs. User-Friendly Interface: Simple and easy-to-use interface ensures hassle-free setup and operation. Adaptable: Supports multiple therapies for adult, pediatric, and neonatal patients, making it a versatile choice for healthcare providers. Reliable Performance: Proven to consistently deliver optimal humidification, ensuring effective therapy. Robust Design: Built to withstand daily hospital use, ensuring long-lasting durability. Flow Sensor Technology: Automatically enters standby mode during periods of gas flow interruption, enhancing safety and efficiency. Condensation Control: Advanced algorithms reduce mobile circuit condensate, ensuring optimal humidity levels with minimal caregiver attention required. Compatibility: Can be used for the full range of Fisher & Paykel Healthcare therapies across the F&P Respiratory Care Continuum. Compact and Stylish: The grey unit with blue highlights is sleek and compact, fitting seamlessly into any clinical setting. Benefits: Improved Comfort: By maintaining optimal humidity levels, the MR850 helps reduce the risk of nasal congestion, dryness, and throat irritation. Enhanced Therapy Compliance: Comfortable and effective humidification encourages better adherence to respiratory therapy, leading to improved treatment outcomes. Convenient and Reliable: With its user-friendly features and reliable performance, the MR850 simplifies your respiratory care routine, allowing you to focus on what matters most – your health. Experience the difference that advanced humidification can make with the MR850 Fisher & Paykel Heated Humidifier. Elevate your respiratory therapy and enjoy a more comfortable, restful night's sleep. Included with the Purchase Humidifier  Printed Manual     F&P 850 System - Reliable. Adaptable. Robust The Fisher & Paykel MR850 Heated Humidifier provides the ideal balance of humidity delivery for the specific therapy, while also prioritizing clinical practicality and minimizing condensation in the mobile circuit. Medical experts can easily select their preferred mode (Invasive or Noninvasive), and the MR850 will efficiently deliver preset levels of heat and humidity. Enhance your respiratory therapy experience with the MR850 Fisher & Paykel Heated Humidifier. Designed to warm and humidify gases delivered to patients requiring mechanical ventilation, positive pressure breathing assistance, or other medical gases, the MR850 ensures optimal comfort and effectiveness.  

Read more less

About the Product Strong & Durable Fitted with Mobile Pole Stand Product Pole mounting tray Model 900PT411 Dimensions Compatible Devices Airvo 2  Included with the Purchase UPS mounting kit UPS Mounting Kit on Mobile Pole Stand for myAirvo 2 Humidifier System  The 900PT411 UPS Mounting Kit is a Fisher & Paykel Healthcare product designed to secure an Uninterruptible Power Supply (UPS) onto the Fisher & Paykel Healthcare 900PT421 Mobile Pole Stand, for use with Fisher & Paykel Healthcare AIRVO 2 Humidifier.

Read more less

About the Product Replacement Air Filters for effective filtering Product Disinfection Filters Model 900PT601 Dimensions Compatible Devices Airvo 2  Included with the Purchase 1 x Disinfection Filters (2 in a pack)  Disinfection Filters  

Read more less

About the Product Replacement Air Filters for effective filtering Product Replacement Air Filters Model 900PT913 Dimensions Compatible Devices Airvo 2  Included with the Purchase 1 x Replacement Air Filters (2 in a pack)  Replacement Air Filters for myAIRVO 2 High Flow Systems These disposable air filters are designed for use with the F&P myAIRVO 2 Humidified High Flow System. We suggest you replace the Air Filters every 3 months or 1000 hours of run time for hygiene concerns. The replacement is very easy, just look for the filter holder locate at the back of the myAirvo 2 device, remove the old filter and insert the new filter into the filter holder.Note: The white filter material is permanently attached to the plastic filter housing. They are not designed to be detached from one another.

Read more less

About the Product Strong & Durable Fitted with Mobile Pole Stand Product Pole mounting tray Model 900PT405 Dimensions Compatible Devices Airvo 2  Included with the Purchase Pole mounting tray - 1 nos  Fisher & Paykel Humidifier Pole Mounting Tray for myAirvo 2 This pole mounting tray attaches on to the Fisher & Paykel Mobile Pole Stand as myAirvo device holding station. Note: Mobile Pole stand can be purchased separately to add convenience to your therapy.

Read more less

About the Product Strong & Durable Movable on wheels Water Bag holder hooks Product Mobile Pole Stand Model 900PT421 Dimensions 3 x 10-1/4 x 63 inch (with caster) Compatible Devices Airvo 2  Included with the Purchase Mobile Pole Stand - 1 nos Mobile Pole Stand for myAirvo 2 Humidifier The mobile pole stand is only for use with Fisher & Paykel myAIRVO 2 Humidifier. It mobilize your myAirvo for you to walk around in the house. Note: Pole mounting tray can be purchased separately to add convenience to your therapy.

Read more less

About the Product Automatically refills Reservoir Volume: 280mL Dual-float mechanism enhances patient safety while maintaining a consistent water level Consistent compressible volume allows for consistent delivery of the prescribed waveform Suitable for all MR-series humidifiers   Product MR290 Auto-fill Humidification chamber Model MR290V, 900PT290E Size Compatible Devices Airvo 2 (PT101xx)  Included with the Purchase Humidification Chamber MR290 - 1 nos MR290 Auto-Fill Humidification Chamber for myAirvo 2 The MR290 Auto-Fill Humidification Chamber is suitable for all MR-series humidifiers and it automatically refills. Please use distilled water only. This Humidification Chamber is designed to be used with Fisher & Paykel Refillable Water Bag for myAirvo 2 system.Please watch the set up video in the product image row for visualized presentation. Features Automatically refills Reservoir Volume: 280mL Dual-float mechanism enhances patient safety while maintaining a consistent water level Consistent compressible volume allows for consistent delivery of the prescribed waveform Suitable for all MR-series humidifiers

Read more less

About the Product An Airvo 2 heated breathing tube that connects to both Optiflow™ and Optiflow Junior Interfaces. The AirSpiral heated breathing tube produces up to 93% less condensate Lightweight and flexible  The AirSpiral heated breathing tube for Airvo 2 utilizes an advanced two-spiral design to help protect against condensate.   Product Oxygen Inlet Kit Model 900PT600 Size Compatible Devices Airvo 2 (PT101xx)  Included with the Purchase Disinfection Kit - 1 nos myAirvo 2 Humidified High Flow System Disinfection Kit This disinfection kit is used to achieve high-level disinfection of the myAIRVO 2 humidified high flow system's humidifier outlet elbow. Disinfection kit should only be used with the Fisher & Paykel Healthcare myAIRVO 2 humidifier.Please follow the user manual for cleaning instructions.   Kit contains disinfection tube, disinfection filter, disinfection kit manual, two cleaning sponge sticks, and three clean storage covers Disinfection kit is used to achieve high-level disinfection of the AIRVO 2 / myAIRVO 2 humidifier outlet elbow Disinfection kit should only be used with the Fisher & Paykel Healthcare AIRVO 2 / myAIRVO 2 humidifier

Read more less

About the Product An Airvo 2 heated breathing tube that connects to both Optiflow™ and Optiflow Junior Interfaces. The AirSpiral heated breathing tube produces up to 93% less condensate Lightweight and flexible  The AirSpiral heated breathing tube for Airvo 2 utilizes an advanced two-spiral design to help protect against condensate.   Product Tube & Chamber Kit Model 900PT561 Size Compatible Devices Airvo 2 (PT101xx)  Included with the Purchase Tube & Chamber Kit - 1 nos AirSpiral Tube and Chamber Kit for F&P myAirvo 2 This is a replacement tube and chamber kit for myAirvo2. Please use distilled water only.  AirSpiral Heated Breathing Tubes produces up to 93% less condensation than the previous myAirvo tubing. This heated breathing tube is designed exclusively for use with the F&P myAIRVO 2 Humidified High Flow System. AirSpiral Tubing utilizes an advanced two-spiral design to help protect against condensation in the delivery system.The two elements of the AirSpiral tubes - an insulating to protect warmed air in the tube from temperature variations outside the tube, and a heating spiral to warm the air it passes through the tube, work together to solve cold drips and distracting sounds that commonly seen with traditional heated tubes. Chamber Features Dual-float mechanism for added safety to prevent the chamber overfilling Automatically refills Consistent compressible volume allows for consistent delivery of the prescribed waveform AirSpiral Heated Tube Features Connects with both Optiflow™ & Optiflow™ Junior interfaces No external probes, cables, or adaptors required Comes with molded clips to attach tubing to clothes or bedding to assist with tube placement 6 feet long Integrated temperature sensor Note: AirSpiral Tubing should be cleaned regularly following the cleaning and maintenance instructions in your myAIRVO 2 User Manual. IT SHOULD NOT BE SOAKED, WASHED OR STERILIZED. For complete instructions review the documentation that came with your equipment.

Read more less

About the Product An Airvo 2 heated breathing tube that connects to both Optiflow™ and Optiflow Junior Interfaces. The AirSpiral heated breathing tube produces up to 93% less condensate Lightweight and flexible  The AirSpiral heated breathing tube for Airvo 2 utilizes an advanced two-spiral design to help protect against condensate.   Product Oxygen Inlet Kit Model 900PT422 Size Compatible Devices Airvo 2 (PT101xx)  Included with the Purchase Oxygen Inlet Kit - 1 nos Fisher & Paykel myAirvo 2 Oxygen Inlet Kit The myAirvo2 Oxygen Inlet Kit is designed for you to connect supplementary oxygen to the Airvo 2/myAirvo 2 Humidified High Flow System (up to 60L/min). The myAirvo 2 contains an oxygen analyzer to help you determine the oxygen fraction you are delivering to the patient. Your unit may have been initially set up with tighter limits. Note: Oxygen must only be added through the special oxygen inlet port on the back of the unit. To ensure that oxygen enters the unit correctly, the oxygen inlet port must be fitted properly to the filter holder and the filter holder must be fitted properly to the unit. The power cord connector should also be well secured.Do not connect more than 60L/min O2 to the oxygen inlet port on the back of the unit. Install instruction Ensure that the power cord connector is well secured to the rear of the unit- if necessary with a cable tie. Clean and dry the side of the unit. Push the end of the tubing  0.3 inch (1 cm) on to the filter holder. Remove the adhesive label and firmly attach the oxygen inlet port to the myAirvo 2 unit as shown. Wait 24 hours before use to allow the adhesive to set.

Read more less

About the Product An Airvo 2 heated breathing tube that connects to both Optiflow™ and Optiflow Junior Interfaces. The AirSpiral heated breathing tube produces up to 93% less condensate Lightweight and flexible  The AirSpiral heated breathing tube for Airvo 2 utilizes an advanced two-spiral design to help protect against condensate.   Product AirSpiral Heated Breathing Tube Model 900PT560E Size Compatible Devices Airvo 2 (PT101xx) MR850 F&P 950* Included with the Purchase AirSpiral Heated Breathing Tube - 1 nos AirSpiral Heated Breathing Tube for Fisher & Paykel myAirvo2 AirSpiral Heated Breathing Tubes produces up to 93% less condensation than the previous myAirvo tubing. This heated breathing tube is designed exclusively for use with the F&P myAIRVO 2 Humidified High Flow System. AirSpiral Tubing utilizes an advanced two-spiral design to help protect against condensation or "rain out" in the delivery system.Cold drips in traditional heated tubes, caused by condensation in tubing and cannulas, have always been a big complaint for high flow air and oxygen users. The warm humidified air in the breathing tube of humidification machines tends to create condensation in the tube if the room temperature is cooler.The two elements of the AirSpiral tubes - an insulating to protect warmed air in the tube from temperature variations outside the tube, and a heating spiral to warm the air it passes through the tube, work together to solve cold drips and distracting sounds that commonly seen with traditional heated tubes. Features Connects with both Optiflow™ & Optiflow™ Junior interfaces No external probes, cables, or adaptors required Comes with molded clips to attach tubing to clothes or bedding to assist with tube placement 2-in-1 tube 6 feet long Integrated temperature sensor USAGE: AirSpiral Tubing should be cleaned regularly following the cleaning and maintenance instructions in your myAIRVO 2 User Manual. IT SHOULD NOT BE SOAKED, WASHED OR STERILIZED. For complete instructions review the documentation that came with your equipment.  

Read more less

About the Product Connects to tracheostomy mask interface with a standard 22 mm medical taper Featuring our patented Evaqua™ technology Lightweight and flexible interface tube   Product Optiflow™+ Mask Interface Adapter Model OPT980E Size Compatible Devices Airvo 2 (PT101xx) MR850 F&P 950* Included with the Purchase OptiFlow + Mask Interface Adapter - 1 nos Optiflow+ Mask Interface Adapter for myAirvo 2 Humidified Systems   Mask interface adapter for delivery of humidified respiratory gases. Features Connects to tracheostomy mask interface with a 22mm medical taper.  Featuring our patented Evaqua™ technology Lightweight and flexible interface tube  

Read more less

About the Product Simple Easy to use interface Adjustable temperature and flow settings Controlled oxygen delivery (when required) - Generates flows up to 60 lpm No condensation in the tubes or interfaces Less noisy than an air compressor - Can be used with oxygen up to 15 lpm  AirSpiral Tube for warming air consistently through the tube Handy gribs on AirSpiral Tube to assist with stabilization Alarms for safety Temperature setting 37, 34 and 31 degrees C for comfort Integrated Temperature Sensor which eliminates probes, cables, or adapter Variety of F&P Optiflow interfaces - Can be used with multiple interfaces Model Airvo 2 Humidified High Flow System Colour Grey with Blue highlights Weight Flow Range 2 up to 60LPM Dimensions LxWxH Included with the Purchase Airvo2 humidifier Replacement Air Filters (2-pack) HC360 Water Chamber 6 ft. Breathing tube (900PT560E)  Oxygen Inlet Kit Power Cord and Connector Funnel Laminated instruction card Carrying Case Printed User Manual     Airvo 2 Humidified high flow therapy system with integrated flow generator (For Hospital use) A device designed to facilitate the treatment of a broad patient group across hospital areas, staffed by many types of clinicians. The Airvo 2 device features a humidifier with integrated flow source that delivers high flows of air/oxygen mixtures to spontaneously breathing patients, through a variety of interfaces up to 60 L/min. The Airvo 2 with its wide range of accessories is an integrated system providing versatility, mobility and convenience.   Designed to treat patients across the hospital A wide flow range (2 - 60 L/min) facilitates the treatment of a broad patient group in a variety of hospital areas staffed by many types of clinicians.  Nasal high flow therapy (NHF) is recommended in several clinical applications among recently published clinical practice guidelines.  A review of the studies referenced by the clinical practice guidelines showed that the majority of the studies used flows of ≥ 45 L/min, i.e., flow rate matters.  Features Generates flows up to 60 lpm Easy to use display screen No condensation in the tubes or interfaces Can be used with oxygen up to 15 lpm Less noise then an air compressor AirSpiral Tube for warming air consistently through the tube Handy gribs on AirSpiral Tube to assist with stabilization Alarms for safety Temperature setting 37, 34 and 31 degrees C for comfort Integrated Temperature Sensor which eliminates probes, cables, or adapter Can be used with multiple interfaces What type of patients is AIRVO2 intended/indicated for?AIRVO 2 can be used on a wide range of patient types, ages, and disease states. In order to obtain AIRVO 2, a patient must have a valid prescription from a healthcare professional. A HCP will be able to diagnose a patient’s situation and determine if AIRVO 2 is the appropriate treatment. I used AIRVO in the hospital, can I buy one to use at home?myAIRVO 2 is FDA approved for use in the home and long term care. If you have a valid prescription from your healthcare provider, the myAIRVO 2 is available for purchase and use in the home.Is myAIRVO 2 covered by insurances?myAIRVO 2 can be covered by insurance depending on patient circumstance. Often times insurance companies will require proper documentation in order to pay for the device. Some of the information that insurance companies may or may not require include: valid prescription from healthcare provider, letter of medical necessity, prior authorization, peer-to-peer review.How long is the breathing tube that comes with the device?The AirSpiral Heated Breathing Tube for AIRVO2 Humidified System is six feet long.  

Read more less

About the Product Simple Easy to use interface Adjustable temperature and flow settings Controlled oxygen delivery (when required) - Generates flows up to 60 lpm No condensation in the tubes or interfaces Less noisy than an air compressor - Can be used with oxygen up to 15 lpm  AirSpiral Tube for warming air consistently through the tube Handy gribs on AirSpiral Tube to assist with stabilization Alarms for safety Temperature setting 37, 34 and 31 degrees C for comfort Integrated Temperature Sensor which eliminates probes, cables, or adapter Variety of F&P Optiflow interfaces - Can be used with multiple interfaces Model myAirvo 2 Humidified High Flow System Colour Grey with Blue highlights Weight Flow Range 2 up to 60LPM Dimensions LxWxH Included with the Purchase myAirvo2 humidifier Replacement Air Filters (2-pack) HC360 Water Chamber 6 ft. Breathing tube (900PT560E)  Oxygen Inlet Kit Power Cord and Connector Funnel Laminated instruction card Carrying Case Printed User Manual     myAirvo 2 Humidified high flow therapy system with integrated flow generator (For home use) The myAirvo 2 device features a humidifier with integrated flow source that delivers high flows of air/oxygen mixtures to spontaneously breathing patients, through a variety of interfaces up to 60 L/min. The myAirvo 2 with its wide range of accessories is an integrated system providing versatility, mobility and convenience. Description   Looking for a replacement for your air compressor? Need a high flow system that is quiet and has a built-in flow generator to meet your humidification needs? Have a look at the myAirvo 2 humidification high flow system. The myAirvo 2 is replacing the need to have a heavy air compressor that is noisy and heavy. It is very versatile and mobile for customers that need to travel. This unit can generate flows up to 60 lpm which can take you from the hospital to home. It is capable to deliver a warm humidified air with an easy to push button interface to adjust flow meeting your targeted air. No more condensation in the tubing or interfaces. No more cold droplets or gurgling noise to keep you awake at night. myAirvo 2 will keep these problems at bay by using the AirSpiral Tube. This tube contains two spiral elements, the heating component that will allow warm air throughout the tube and the insulation component to keep temperatures even throughout the tube which can vary from the environment. The myAirvo can decrease condensation by 93% making this a unit to look at! So, you say you use oxygen with your air compressor? No worries. The myAirvo 2 is compatible with any supplemental continuous flow system, up to 15 lpm, for anyone that is prescribed oxygen. Simply add an oxygen port and the built-in ultrasonic analyzer integrates the flow without special setup. Just remember if you think this system could help with your oxygen therapy, make sure to talk with your physician. Features Generates flows up to 60 lpm Easy to use display screen No condensation in the tubes or interfaces Can be used with oxygen up to 15 lpm Less noise then an air compressor AirSpiral Tube for warming air consistently through the tube Handy gribs on AirSpiral Tube to assist with stabilization Alarms for safety Temperature setting 37, 34 and 31 degrees C for comfort Integrated Temperature Sensor which eliminates probes, cables, or adapter Can be used with multiple interfaces What type of patients is myAIRVO2 intended/indicated for?myAIRVO 2 can be used on a wide range of patient types, ages, and disease states. In order to obtain myAIRVO 2, a patient must have a valid prescription from a healthcare professional. A HCP will be able to diagnose a patient’s situation and determine if myAIRVO 2 is the appropriate treatment. I used AIRVO in the hospital, can I buy one to use at home?myAIRVO 2 is FDA approved for use in the home and long term care. If you have a valid prescription from your healthcare provider, the myAIRVO 2 is available for purchase and use in the home.Is myAIRVO 2 covered by insurances?myAIRVO 2 can be covered by insurance depending on patient circumstance. Often times insurance companies will require proper documentation in order to pay for the device. Some of the information that insurance companies may or may not require include: valid prescription from healthcare provider, letter of medical necessity, prior authorization, peer-to-peer review.How long is the breathing tube that comes with the device?The AirSpiral Heated Breathing Tube for myAIRVO2 Humidified System is six feet long.  

Read more less

About the Product Simple and Easy to use  The HC150 with Ambient Tracking™ offers many of the humidification benefits of our integrated SleepStyle™ 200 series. Ambient Tracking balances humidity to compensate for changes in room temperature, therefore minimizing disruptive condensation. The HC150 will work with non-humidified CPAPs to provide effective CPAP therapy under changing conditions. Model MR150 Heated Humidifier with Ambient Tracking for CPAP & BiPAP Machines Colour Grey Weight 1.8 lbs Flow Range Dimensions LxWxH 2.1 x 5.2 x 5.7 Inches Included with the Purchase HC150 Stand Alone Humidifier HC325 Water Chambers - 2nos Humidifier Stand 18 inch Tube Humidifier Base  Power Cord Instruction Manual     Description The HC150 respiratory humidifier is used to warm and humidify gases delivered to patients requiring continuous positive airway pressure (CPAP) therapy or mask ventilation. The Fisher and Paykel HC150 Heated Humidifier offers you a simple all-in-one option for adding an external humidifier to your CPAP Machine. Receive all the necessary CPAP accessories needed to use this humidifier right out of the box! HC150 Humidifier, stand, base, 18 inch tube, 2 water chambers, and power cord are all included in one convenient package. Read our "Included in the Package" section for more details on this product. This humidifier uses ambient tracking which adjusts to room temperature. This ensures you receive the perfect amount of humidity while also reducing the potential of rain-out or excess water in your CPAP Hose. The HC150 will work with any CPAP or BiPAP on the market to provide you with the most effective CPAP therapy under changing conditions. Continue reading below to find features and benefits of this humidifier. The Fisher and Paykel HC325 Water Chamber and Universal CPAP Tubing Hose - 18 inches are included with the HC150 Heated Humidifier to provide you everything you need in one convenient product.  

Read more less