AED ACCESSORIES

About the Product Model FRx SMART Training Pads II Product ID(Legacy/New) 989803139271 Compatible Models Philips HeartStart FRx Manufacturer Brand Philips What's included in this Package: Training pads II for FRX AED   HeartStart FRx SMART Training Pads II  It can be an alternative for buying a stand-alone trainer. Connect these training pads to your working Philips FRx AED to convert it into a training device. When you're finished, disconnect the Training Pads, replace them with working adult pads, and your Philips FRx is again ready for use! Includes training pads, protective storage case, and pad placement guide. Using these pads on a manikin will require the use of an External Manikin Adapter or an Internal Manikin Adapter. Also, the FRx Infant/Child Key is required for pediatric training. Note:  For infant/child training purchase Infant/Child Key.

Read more less

The Philips HeartStart Onsite/Home SMART Pads Cartridge for Adults is designed to provide life-saving support during an emergency. This cartridge is equipped with SMART Technology and proven patient physiology algorithms to optimize therapy for more effective, quicker recovery. The pads also feature real-time, on-screen guidance for pad placement. This Adult Replacement SMART Electrode Pads Cartridge comes within Philips' convenient cartridge format. It offers 1 set of electrode pads, as well as a "pull handle" integrated into the design. It is compatible with Philips HeartStart OnSite AED and HeartStart Home AED. The Philips SMART adult electrode pads supply a nominal 150 joules into a 50-ohm load. Active surface area is 13 square inches (85 square centimeters) per pad, and the cable length is 54 inches (85 centimeters).These replacement electrode pads are intended for adults (anyone over 55 lbs. and older than 8 years of age).  If you're buying electrode pads for your Philips AED, now would be a great time to check the status and expiration date of your battery pack, too!Expiration: Use-by date Cartridge is labeled with a use-by date of at least 2 years from date of manufacture. Note that electrode pads for the Philips HeartStart Home and OnSite AED units must be replaced after use or by the indicated expiration date. Check the expiration date which is located in the white box underneath the diagram that shows where to place the electrode pads during use.For use with the following Philips AED units: M5066A, M5068A, HS1 Active surface area 85 cm2 (13.2 in2 ) each Cable length Adult SMART Pads: 137.1 cm (54 in) Infant/Child SMART Pads: 101.6 cm (40 in)   About the Product Model Adult SMART Pads Cartridge Product ID(Legacy/New) M5071A/ 861291 Compatible Models Philips HeartStart Onsite/Home Manufacturer Brand Philips Note: Prescription not needed  

Read more less

About the Product Model Philips HeartStart Configure Software Product ID(Legacy/New) 861487-A01 Compatible Models Philips HeartStart Onsite/FRx Manufacturer Brand Philips Philips HeartStart Configure Software Configure your HeartStart AED from a computer, reflecting your medical director’s preferences.

Read more less

About the Product Model Philips OEM Infrared Data Cable Product ID(Legacy/New) ACT-IR/989803121461 Compatible Models Philips HeartStart Onsite/FRx Manufacturer Brand Philips Philips OEM Infrared Data Cable Transfer data from your Philips Healthcare AED to your personal computer. This infrared cable is designed to download rescue data from your Philips HeartStart OnSite or FRx AED to your personal computer. When connected to a PC running HeartStart Review Express, Review Express Connect, Event Review, or Event Review Pro, the Infrared Data reader allows you to retrieve patient data from your defibrillator for permanent storage, as well as review and reporting.

Read more less

About the Product Model Event Review Pro Software – Multiple PC Product ID(Legacy/New) 861431-A06 Compatible Models Philips HeartStart AED Manufacturer Brand Philips Event Review Pro Software –Multi PC Used for defibrillator data management and reporting. Please note: Software UPGRADES are also available in dropdown choices.   HeartStart Event Review Pro is a software solution designed to help you analyze and fine tune your facility's response to cardiac events. It offers built-in compatibility with your Philips AEDs and monitor/defibrillator devices and includes a range of tools that allow you to be truly confident in your post-event data analysis. The software, which works with standard PC hardware running Microsoft Windows 10, analyses post-event data from Philips AEDs and ALS monitor/defibrillators to provide a strong foundation for robust post-event analysis. It offers flexible workflows, lets you view and evaluate trends and allows you to create a wide range of reports. It also helps you effectively evaluate the quality of CPR with Q-CPRᵀᴹ report cards.   Specifications Software Requirements Operating system Microsoft Windows 10 (64-bit) is required for Event Review Pro Event Review Pro Server Pack requires one of the following: Microsoft Windows Server 2016 Microsoft Windows Server 2019 Microsoft Windows 10 (32- or 64-bit) Database Microsoft SQL 2019 Express is included; shared database requires Microsoft SQL Server 2017 or 2019 Hardware Requirements Processor speed Event Review Pro: min 2 GHz x64 processor Event Review Pro Server Pack: min 2GHz x86/x64 processor Display Minimum 1024 x 768 Recommended 1600 x 1200 or higher Disk space Event Review Pro: minimum 25 GB* Event Review Pro Server Pack: minimum 10 GB* Memory Minimum: 4 GB memory Recommended: 8 GB or higher Internet connection Required to activate the application software, to use the email feature, and to receive software updates.     OVERVIEW HeartStart Event Review PRO Software provides easy-to-use data management applications for electronically managing the case data recorded by your HeartStart Defibrillator; whether you are interested in data collection, case review, response analysis, data trending, or performance evaluation for the entire emergency program. HeartStart Event Review PRO helps the more demanding and sophisticated medical director or code team leader take a big-picture view of their resuscitation program so they can evaluate and optimize resuscitation response. And it lets them collect and review more comprehensive response and patient data than Event Review, including detailed BLS and ALS responder observations and interventions. Event Review PRO also manages 12-lead ECG information and monitoring data collected by the Philips HeartStart MRx Monitor/Defibrillator REPORTING You can integrate ECGs from multiple defibrillators into one case for a complete event history. Event Review's case reports include ECG waveform event log and case data. With Event Review Pro, you get case reports, 12-lead reports, Utstein reports and overall system response time summaries. These reports help you evaluate trends in the timeliness and effectiveness of your response system, so you can assess performance versus service level obligations. You can also create custom reports using Crystal Reports reporting software. INFORMATION SHARING You can e-mail cases to colleagues who are running Event Review so they can review them. Software is easy-to-use and features plenty of on-screen help. HANDS-ONLY CPR This software may also be used to reconfigure your Philips HeartStart OnSite AEDs to the new optional "hands-only" CPR protocol at the discretion of your medical director. HeartStart Event Review and Event Review PRO Comparison Chart FEATURE Event Review Event Review PRO ECG and Events Yes Yes ECG Annotation Yes Yes Case Data Entry Fields Concise Comprehensive Cases Saved in Database forQuery and Analysis Yes Yes Case Data Sharing e-mail e-mail and network access by multiple users 12-Lead View, Store, Forward(manually) to Printer/Fax/TraceMaster No Yes Individual Case Reports Yes Yes EMS Utstein and System-WidePerformance Reports No Yes Defibrillators Supported Philips & Laerdal HeartStart HS1 FamilyPhilips & Laerdal FRxPhilips & Laerdal HeartStart FR2-seriesPhilips ForeRunnerPhilips HeartStart MRxPhilips HeartStart XLPhilips HeartStart XLTLaerdal HeartStart FRLaerdal HeartStart 4000 Philips & Laerdal HeartStart HS1 FamilyPhilips & Laerdal HeartStart FR2-seriesPhilips ForeRunnerPhilips HeartStart MRxPhilips HeartStart XLPhilips HeartStart XLTLaerdal HeartStart FRLaerdal HeartStart 4000 Device Configuration Philips & Laerdal HeartStart HS1 and FRx No Self-Test Reports Yes Yes Configurable Security Levels Yes No Palm HotSync of HeartStart FRx and HS1 family files Yes No  

Read more less

About the Product Model Event Review Pro Software – Single PC Product ID(Legacy/New) 861431-A01 Compatible Models Philips HeartStart AED Manufacturer Brand Philips Event Review Pro Software –Single PC Used for defibrillator data management and reporting. Please note: Software UPGRADES are also available in dropdown choices.   HeartStart Event Review Pro is a software solution designed to help you analyze and fine tune your facility's response to cardiac events. It offers built-in compatibility with your Philips AEDs and monitor/defibrillator devices and includes a range of tools that allow you to be truly confident in your post-event data analysis. The software, which works with standard PC hardware running Microsoft Windows 10, analyses post-event data from Philips AEDs and ALS monitor/defibrillators to provide a strong foundation for robust post-event analysis. It offers flexible workflows, lets you view and evaluate trends and allows you to create a wide range of reports. It also helps you effectively evaluate the quality of CPR with Q-CPRᵀᴹ report cards.   Specifications Software Requirements Operating system Microsoft Windows 10 (64-bit) is required for Event Review Pro Event Review Pro Server Pack requires one of the following: Microsoft Windows Server 2016 Microsoft Windows Server 2019 Microsoft Windows 10 (32- or 64-bit) Database Microsoft SQL 2019 Express is included; shared database requires Microsoft SQL Server 2017 or 2019 Hardware Requirements Processor speed Event Review Pro: min 2 GHz x64 processor Event Review Pro Server Pack: min 2GHz x86/x64 processor Display Minimum 1024 x 768 Recommended 1600 x 1200 or higher Disk space Event Review Pro: minimum 25 GB* Event Review Pro Server Pack: minimum 10 GB* Memory Minimum: 4 GB memory Recommended: 8 GB or higher Internet connection Required to activate the application software, to use the email feature, and to receive software updates.     OVERVIEW HeartStart Event Review PRO Software provides easy-to-use data management applications for electronically managing the case data recorded by your HeartStart Defibrillator; whether you are interested in data collection, case review, response analysis, data trending, or performance evaluation for the entire emergency program. HeartStart Event Review PRO helps the more demanding and sophisticated medical director or code team leader take a big-picture view of their resuscitation program so they can evaluate and optimize resuscitation response. And it lets them collect and review more comprehensive response and patient data than Event Review, including detailed BLS and ALS responder observations and interventions. Event Review PRO also manages 12-lead ECG information and monitoring data collected by the Philips HeartStart MRx Monitor/Defibrillator REPORTING You can integrate ECGs from multiple defibrillators into one case for a complete event history. Event Review's case reports include ECG waveform event log and case data. With Event Review Pro, you get case reports, 12-lead reports, Utstein reports and overall system response time summaries. These reports help you evaluate trends in the timeliness and effectiveness of your response system, so you can assess performance versus service level obligations. You can also create custom reports using Crystal Reports reporting software. INFORMATION SHARING You can e-mail cases to colleagues who are running Event Review so they can review them. Software is easy-to-use and features plenty of on-screen help. HANDS-ONLY CPR This software may also be used to reconfigure your Philips HeartStart OnSite AEDs to the new optional "hands-only" CPR protocol at the discretion of your medical director. HeartStart Event Review and Event Review PRO Comparison Chart FEATURE Event Review Event Review PRO ECG and Events Yes Yes ECG Annotation Yes Yes Case Data Entry Fields Concise Comprehensive Cases Saved in Database forQuery and Analysis Yes Yes Case Data Sharing e-mail e-mail and network access by multiple users 12-Lead View, Store, Forward(manually) to Printer/Fax/TraceMaster No Yes Individual Case Reports Yes Yes EMS Utstein and System-WidePerformance Reports No Yes Defibrillators Supported Philips & Laerdal HeartStart HS1 FamilyPhilips & Laerdal FRxPhilips & Laerdal HeartStart FR2-seriesPhilips ForeRunnerPhilips HeartStart MRxPhilips HeartStart XLPhilips HeartStart XLTLaerdal HeartStart FRLaerdal HeartStart 4000 Philips & Laerdal HeartStart HS1 FamilyPhilips & Laerdal HeartStart FR2-seriesPhilips ForeRunnerPhilips HeartStart MRxPhilips HeartStart XLPhilips HeartStart XLTLaerdal HeartStart FRLaerdal HeartStart 4000 Device Configuration Philips & Laerdal HeartStart HS1 and FRx No Self-Test Reports Yes Yes Configurable Security Levels Yes No Palm HotSync of HeartStart FRx and HS1 family files Yes No  

Read more less

About the Product Model Data Messenger Software – Site-wide License Product ID(Legacy/New) 861451-A03 Compatible Models Philips HeartStart AED Manufacturer Brand Philips Data Messenger Software –Site-wide License Download, store & send Philips AED data to where it’s needed most. DESCRIPTION HeartStart Data Messenger assists in moving defibrillator data and rescue information to where it needs to be. A necessity for fire departments and EMS organizations who want to download defibrillator cases from their Philips AEDs and forward them to a central data administrator or medical director for post-event review using Event Review or Event Review Pro.   Data Messenger can be configured to operate automatically in the background. Alternatively, users can configure it to act as an easy-to-use wizard that guides you step by step in downloading, viewing, and forwarding events. Data Messenger can be run on a PC or a Smartphone.

Read more less

About the Product Model Data Messenger Software – Single PC Product ID(Legacy/New) 861451-A01 Compatible Models Philips HeartStart AED Manufacturer Brand Philips Data Messenger Software –Single PC Download, store & send Philips AED data to where it’s needed most. DESCRIPTION HeartStart Data Messenger assists in moving defibrillator data and rescue information to where it needs to be. A necessity for fire departments and EMS organizations who want to download defibrillator cases from their Philips AEDs and forward them to a central data administrator or medical director for post-event review using Event Review or Event Review Pro.   Data Messenger can be configured to operate automatically in the background. Alternatively, users can configure it to act as an easy-to-use wizard that guides you step by step in downloading, viewing, and forwarding events. Data Messenger can be run on a PC or a Smartphone.

Read more less

About the Product Model Zoll™ Pads Adapter Product ID(Legacy/New) 05-10000/989803100041 Compatible Models Philips HeartStart FRx & FR2+ AED Manufacturer Brand Philips Note: Use this adapter to connect your FRx/FR2/FR2+ electrode pads to a ZOLL® brand ALS defibrillator/monitor Zoll™ Pads Adapter DESCRIPTION HeartStart Adult FRx/FR2/FR2+ AED Defibrillator Electrode Pads may also be used with defibrillators from other manufacturers, using reusable Philips HeartStart Adapters, whether the other defibrillators are biphasic or monophasic, manual or automated. This adapter allows ALS (Advanced Life Support) caregivers to connect your Philips electrode pads to the ZOLL ALS manual defibrillator/monitor. This adapter cannot be used with FR2 Infant/Child Reduced-Energy Defibrillator Electrode Pads or any electrode pads labeled for use with earlier Laerdal AEDs. Not for use to connect to the ZOLL AED Plus or Pro AEDs. Use this adapter if you currently use the following Philips electrode pads: DP2DP6M3713AM3716AM3718A989803139261989803158211989803158221 and, you need to connect them to the following ZOLL ALS defibrillator/monitors: 120014001600M BasicM ACLS PlusM UniversalM Universal Plus

Read more less

About the Product Model HeartStart AED Pads Adapter (Quik-Combo) Product ID(Legacy/New) 05-10000/989803100031 Compatible Models Philips HeartStart FRx & FR2+ AED Manufacturer Brand Philips DESCRIPTION HeartStart Adult FRx/FR2/FR2+ AED Defibrillator Electrode Pads may also be used with defibrillators from other manufacturers, using reusable Philips HeartStart Adapters, whether the other defibrillators are biphasic or monophasic, manual or automated. This adapter allows ALS caregivers to connect your Philips electrode pads to their manual defibrillator. This adapter cannot be used with FR2 Infant/Child Reduced Energy Defibrillator Electrode Pads or any electrode pads labeled for use with earlier Laerdal AEDs. Use this adapter if you currently use the following Philips electrode pads: DP2DP6M3713AM3716AM3718A989803139261989803158211989803158221   and, you need to connect them to the following Physio-Control defibrillators:   LIFEPAK 9LIFEPAK 10CLIFEPAK 11LIFEPAK 12LIFEPAK 15LIFEPAK 20LIFEPAK 500     Important Note: This adapter is not compatible with the LIFEPAK 1000 or LIFEPAK CR-Plus AEDs.

Read more less

About the Product Model FRx Owner's Manual Product ID(Legacy/New) 989803138731 Compatible Models Philips HeartStart FRx Manufacturer Brand Philips What's included in this Package:  FRx Owner's Manual

Read more less

About the Product Model FRx Quick Reference Guide Product ID(Legacy/New) 989803138601 Compatible Models Philips HeartStart FRx Manufacturer Brand Philips What's included in this Package: Quick Reference Guide

Read more less