HOSPITAL HUMIDIFIERS

About the Product Simple .Easy to use interface Adaptable. One device supports multiple therapies for adult, pediatric and neonatal patients Reliable. Proven to consistently perform Robust. Designed to withstand daily hospital use Flow sensor technology. Automatic standby during periods of gas flow interruption Condensation Control and Humidity Compensation. Automatic algorithms designed to reduce mobile circuit condensate Model MR850 Heated Humidifier Colour Grey with Blue highlights Weight 6.2 lbs Flow Range up to 60LPM invasive mode, up to 120LPM non-invasive mode Dimensions LxWxH 14 x 17.3 x 13.5 cm Included with the Purchase Humidifier  Printed Manual     Description One System for All Patients The MR850 respiratory humidifier from Fisher & Paykel healthcare is used to warm and humidify gases delivered to patients requiring mechanical ventilation, positive pressure breathing assistance or other medical gases.  It designed to be simple to operate and high performing solution capable of operating in either Invasive or Non-invasive control modes. The MR850 heated humidifier is part of a complete system designed to deliver optimally humidified gas to adult and infant patients. This dual feedback system incorporated advanced algorithms designed to achieve optimal humidity levels, while minimizing caregiver attention required. The MR850 can be used for full range of Fisher & Paykel Healthcare therapies across the F&P Respiratory Care Continuum. F&P 850 System - Reliable. Adaptable. Robust The F&P 850 System balances the delivery of optimal humidity for the therapy being delivered, with clinical usability and reduction of mobile circuit condensate. Clinicians select their desired mode (Invasive or Noninvasive) and the F&P 850 System will automatically work to deliver pre-set levels of heat and humidity.  

Read more less

About the Product Simple Easy to use interface Adjustable temperature and flow settings Controlled oxygen delivery (when required) - Generates flows up to 60 lpm No condensation in the tubes or interfaces Less noisy than an air compressor - Can be used with oxygen up to 15 lpm  AirSpiral Tube for warming air consistently through the tube Handy gribs on AirSpiral Tube to assist with stabilization Alarms for safety Temperature setting 37, 34 and 31 degrees C for comfort Integrated Temperature Sensor which eliminates probes, cables, or adapter Variety of F&P Optiflow interfaces - Can be used with multiple interfaces Model Airvo 2 Humidified High Flow System Colour Grey with Blue highlights Weight Flow Range 2 up to 60LPM Dimensions LxWxH Included with the Purchase Airvo2 humidifier Replacement Air Filters (2-pack) HC360 Water Chamber 6 ft. Breathing tube (900PT560E)  Oxygen Inlet Kit Power Cord and Connector Funnel Laminated instruction card Carrying Case Printed User Manual     Airvo 2 Humidified high flow therapy system with integrated flow generator (For Hospital use) A device designed to facilitate the treatment of a broad patient group across hospital areas, staffed by many types of clinicians. The Airvo 2 device features a humidifier with integrated flow source that delivers high flows of air/oxygen mixtures to spontaneously breathing patients, through a variety of interfaces up to 60 L/min. The Airvo 2 with its wide range of accessories is an integrated system providing versatility, mobility and convenience.   Designed to treat patients across the hospital A wide flow range (2 - 60 L/min) facilitates the treatment of a broad patient group in a variety of hospital areas staffed by many types of clinicians.  Nasal high flow therapy (NHF) is recommended in several clinical applications among recently published clinical practice guidelines.  A review of the studies referenced by the clinical practice guidelines showed that the majority of the studies used flows of ≥ 45 L/min, i.e., flow rate matters.  Features Generates flows up to 60 lpm Easy to use display screen No condensation in the tubes or interfaces Can be used with oxygen up to 15 lpm Less noise then an air compressor AirSpiral Tube for warming air consistently through the tube Handy gribs on AirSpiral Tube to assist with stabilization Alarms for safety Temperature setting 37, 34 and 31 degrees C for comfort Integrated Temperature Sensor which eliminates probes, cables, or adapter Can be used with multiple interfaces What type of patients is AIRVO2 intended/indicated for?AIRVO 2 can be used on a wide range of patient types, ages, and disease states. In order to obtain AIRVO 2, a patient must have a valid prescription from a healthcare professional. A HCP will be able to diagnose a patient’s situation and determine if AIRVO 2 is the appropriate treatment. I used AIRVO in the hospital, can I buy one to use at home?myAIRVO 2 is FDA approved for use in the home and long term care. If you have a valid prescription from your healthcare provider, the myAIRVO 2 is available for purchase and use in the home.Is myAIRVO 2 covered by insurances?myAIRVO 2 can be covered by insurance depending on patient circumstance. Often times insurance companies will require proper documentation in order to pay for the device. Some of the information that insurance companies may or may not require include: valid prescription from healthcare provider, letter of medical necessity, prior authorization, peer-to-peer review.How long is the breathing tube that comes with the device?The AirSpiral Heated Breathing Tube for AIRVO2 Humidified System is six feet long.  

Read more less